Daniel Defense has released the NULL556, a 5.56 NATO rifle suppressor 3D-printed from a nickel-based superalloy, and it's available now from Daniel Defense and from retail dealers. Retail listings run from about $999. The can comes in black or Flat Dark Earth Cerakote.

Daniel Defense NULL556 Suppressor
Daniel Defense NULL556 Suppressor

5.56 NATO / .223 Rem · Inconel 718 · under 15 oz

Black Friday deal

Starting Sunday, November 22, Daniel Defense is taking $500 off a NULL556 bought with a compatible rifle, or $250 off one bought with a compatible upper receiver group.

NULL556 at a glance

Caliber5.56 NATO / .223 Remington
Material718 nickel-based superalloy (Inconel 718), metal additive manufacturing
WeightUnder 15 oz
Sound reductionAbout 20 dB (varies with barrel length and ammunition)
MountingSteel hub interface; dealers list a 1/2x28 direct-thread configuration
FinishesBlack or Flat Dark Earth Cerakote
Retail priceAbout $999

Why Inconel

The NULL556 is produced through metal additive manufacturing from 718, the nickel-chromium superalloy better known as Inconel 718. Daniel Defense chose it over titanium for its strength and heat resistance under demanding firing schedules. Printing the can as one piece lets the company use internal geometry that conventional machining and welded baffle stacks can't easily produce. Even with the denser alloy, Daniel Defense puts the weight at under 15 ounces.

Daniel Defense NULL556 suppressor, side profile in black Cerakote
The NULL556's multifaceted exterior is part of its thermal management. Photo: Daniel Defense

Built for short barrels

Inside, a multipath baffle architecture and an optimized blast chamber are designed to cut the usual trade-off between sound suppression and gas mitigation. The goal is low back pressure: less gas blown back into the action and toward the shooter's face, and a bolt carrier that runs closer to its unsuppressed speed. That matters most on short-barreled hosts like the MK18 that Daniel Defense used in its launch video.

Daniel Defense NULL556 suppressor, angled view of the end cap
Engineered end-cap apertures push gas forward and cut visible flash. Photo: Daniel Defense

Daniel Defense rates the NULL556 at a reduction of approximately 20 dB, noting that the figure varies with barrel length and ammunition. The suppressor mounts through a steel hub interface, and dealers are listing it in a 1/2x28 direct-thread configuration for 5.56 and .223 Remington hosts.

Buying one

The NULL556 joins Daniel Defense's SoundGuard suppressor line, which the company introduced a few years ago. Daniel Defense previewed the NULL556 on November 16 before releasing it this week. Buyers still go through the Form 4, the background check and the wait, but the 2025 federal tax law zeroed the transfer tax on suppressors at the start of this year, so there's no $200 stamp on top of the price. Confirm the current process with your dealer, because the implementation details are still settling.